Land Rover Engines In Stock NOW: Live Prices, Rebuild Cost & Supply & Fit Service (UK-Wide)
Check REAL-TIME stock availability for all Land Rover models. View exact rebuild costs, professional engine works & find a certified garage near you - all with 12-month warranty, MoT-ready units, and same-day dispatch.
Jaguar XE Engine Specialists - From Ingenium I4 to Supercharged V6
At JLR Engine Specialists Ltd, we've dedicated our workshop exclusively to Jaguar Land Rover engines since 2009 - and the Jaguar XE is one of the most frequently serviced models in our Billericay facility. Whether you drive a 2015 XE 2.0d R-Sport with the early Ingenium diesel, a 2018 XE 25t with the 2.0L turbocharged petrol, or a high-performance 2020 XE S powered by the 3.0L supercharged V6 (AJ126), our team has diagnosed, rebuilt, or replaced over 1,200 JLR engines, including hundreds of XE units across all major engine families.
We specialise in all Jaguar XE engine variants, covering every production year (2015-present) and key trim levels (SE, R-Sport, Portfolio, S):
Every XE Engine Replacement Includes:
- ✓ Full fitment
- ✓ ECU reprogramming (using dealer-level JLR SDD and Autologic)
- ✓ Comprehensive road test
- ✓ 12-month unlimited-mileage warranty
- ✓ Diagnostics are free if you proceed with the repair
Unlike general garages or even some main dealers, we focus only on JLR powertrains - so your XE engine is handled by technicians who understand its specific failure patterns, from Ingenium timing chain stretch and low-pressure fuel pump failures to V6 supercharger clutch wear and carbon buildup on direct-injection petrol engines.
Based in Billericay, Essex (near Chelmsford and Romford), we offer UK-wide vehicle collection for a small fee, ensuring your XE is repaired in our dedicated JLR-only workshop - not a multi-brand bay with generic tooling.
Every XE engine replacement includes: full fitment, ECU reprogramming (using dealer-level JLR SDD and Autologic), comprehensive road test, and a 12-month unlimited-mileage warranty. Diagnostics are free if you proceed with the repair - no hidden fees, just transparent, expert-level service.
"Complete peace of mind with every engine replacement"
Our Gallery
Precision. Performance. Perfection.
Jaguar XE Engine Fit Guaranteed: All X760 Models (2015-2025)
Starting from £4,100, our reconditioned engines are engineered for perfect fitment across every Jaguar XE model - including all variants of the X760 (2015-2025). No more guessing: we verify compatibility down to the VIN for SE, Prestige, R-Sport, Portfolio, and special editions like the Chequered Flag or HSE.
Every engine is cross-referenced against Jaguar Land Rover’s technical bulletins - including known issues such as early Ingenium 2.0L oil pump failures (2015-2018) and timing chain tensioner wear in P200/P250 units. With 15+ years of JLR engine expertise and 1,200+ rebuilds completed in our Billericay workshop near Chelmsford, Essex, fitment is guaranteed.
XE Engine Prices: Transparent, OEM-Spec Reconditioned Units from £4,100
Save 40% vs. Dealership Prices - Compare pricing for Ingenium P200, P250, P300, and D200 engines across all XE X760 models (2015-2025).
| Engine Code | Est. Price (£) | XE Models (Trim/Drivetrain) | Engine Size (L) | Fuel Type | Power (kW/HP) | Year Range | Warranty | Request Quote |
|---|
Note: All replacements include correct ancillaries (sumps, manifolds, sensors) matched to your VIN. We support both pre-facelift (2015-2019) and post-facelift (2020-) XE models, including updated engine mounting points and CAN bus protocols.
Key Reliability Insights
P250/P300 (AJ200): Suffer from timing chain tensioner failure after 60k miles (confirmed by Jaguar Enthusiasts survey: 26% failure rate by 80k).
D180 diesel: Prone to EGR cooler coking and DPF pressure faults - common cause of limp mode.
XE S (AJ126): Supercharger coupling wear and coolant leaks at thermostat housing.
Project 8 (S55): Extremely rare (300 units) - no salvage supply. Only specialist rebuilds available.
"Certified XE Engine Rebuilds by JLR-Trained Technicians - Based in Essex, Serving the South East & UK via Collection"
How We Rebuild Your Jaguar XE Engine - Precision, Not Promises
This isn't a generic engine swap. Every Jaguar XE engine we rebuild is treated as a unique case - based on its engine code, mileage, failure history, and model year. Here's our 5-step workshop process, carried out entirely in-house at our Billericay, Essex facility by JLR-trained technicians:
Root-Cause Diagnosis - Beyond the Fault Code
We go deeper than generic OBD2 scans to uncover the true failure trigger:
→ AJ200P (P200/P250)? Check low-pressure fuel pump voltage drop and high-pressure rail leakage.
→ AJ200D (D180/D200)? Inspect EGR cooler integrity, timing chain tensioner wear, and DPF backpressure logs.
→ AJ126 (XE S V6)? Assess supercharger clutch engagement, oil pickup screen clogging, and PCV system sludge.
You receive photo and diagnostic evidence - not guesswork.
Precision Metrology - Engineered to OEM Tolerances
Using calibrated bore gauges, dial indicators, and surface plates, we verify:
• Crankshaft end float and journal wear (<0.03mm tolerance)
• Cylinder bore taper and roundness (critical for piston ring seal)
• Cylinder head flatness (<0.05mm over 300mm - essential for MLS gasket reliability)
If out of spec, we machine in-house - no outsourcing.
Rebuild with Known Weakness Fixes
We integrate proven upgrades to prevent repeat failures:
• Ingenium I4: Reinforced timing chain tensioner rails, upgraded oil pump pickup strainer, and revised PCV valves
• AJ126 V6: High-flow oil pickup tube, supercharger clutch service kit, and updated coolant hoses
All components are OEM-spec or premium-tier: Mahle pistons, Elring gaskets, Bosch sensors - never budget alternatives.
In-House Machining & Clean Assembly
Block honing, head resurfacing, and pressure testing are all completed on-site. Engines are assembled in a dedicated clean bay with controlled airflow to eliminate particulate contamination - a common cause of premature wear in direct-injection engines.
Validation - Dyno + Real-World Testing
Before your XE leaves our workshop:
• 45-minute controlled run-in on engine stand (oil pressure ≥3.5 bar at hot idle)
• Full ECU reset, adaptation, and security handshake using JLR SDD and Autologic
• 15-mile loaded road test including cold restart, highway load, and emissions system verification
You receive a signed validation report - not just a warranty certificate.
"Since 2009, we've rebuilt 1,200+ JLR engines - including hundreds of XEs across all trims and engine codes. We don't sell engines. We sell peace of mind for XE owners across Essex and the UK."
Jaguar XE Engine Warning Signs - And How We Fix Them for Good
Spot one of these issues? You're not alone. These are the most frequent XE engine failures we diagnose weekly in our Billericay, Essex workshop - and exactly how we resolve them permanently, not just temporarily.
| Problem | Likely Cause | Our Fix | Affects |
|---|---|---|---|
| Rattling or knocking on cold start | Timing chain stretch or tensioner failure (common in early Ingenium engines) | Full timing system replacement with reinforced tensioner rails and updated chain guides | AJ200D/P (2015-2018 XE D180, D200, P200, P250) |
| Loss of power + DPF warning | Clogged EGR cooler or failed DPF regeneration leading to soot overload | EGR cooler replaced, DPF cleaned or replaced, and software recalibrated to prevent recurrence | AJ200D diesel models (2015-2020) |
| Engine cuts out or misfires under load | Low-pressure fuel pump failure (petrol Ingenium) or injector leakage | Fuel pump and filter replaced with OEM-spec unit; injectors flow-tested and replaced if needed | AJ200P (P200, P250 - 2016-2020) |
| Whining noise + oil pressure warning | Oil pickup screen clogged with sludge (especially in V6 or low-mileage cars with infrequent oil changes) | Sump removed, pickup screen cleaned, full oil system flush, and upgraded PCV valve fitted | AJ126 V6 (XE S 340/380, 2016-2020) |
| Excessive oil consumption (>1L/1,000 miles) | Worn piston rings or valve stem seals (often after missed services) | Full engine rebuild with Mahle pistons and Elring seals; compression and leak-down tests performed | All XE engines, especially high-mileage or neglected examples |
| Check Engine light + P0087 code | High-pressure fuel rail over-pressurisation (petrol Ingenium) | High-pressure fuel pump and rail pressure sensor inspected; updated calibration applied via JLR SDD | AJ200P (2018-2024) |
Don't guess - diagnose. Book a free engine assessment and get a no-obligation, VIN-specific repair plan from Jaguar XE engine specialists based in Essex (near Chelmsford and Romford). We offer UK-wide vehicle collection so your XE can be repaired correctly - first time, every time.