Jaguar & Land Rover Brake Repair – ABS & EPB Recalibration
Expert brake repair for JLR in Billericay. OE-spec pads, discs & sensors. Full ABS/EPB recalibration included. Same-day service.
Heavy SUVs like the Range Rover Sport and performance sedans like the Jaguar XF place extreme demands on braking systems. Worn pads or warped discs aren't just a safety risk-they can trigger ABS, ESC, or Hill Descent Control warnings that disable key features.
At JLR Engine Specialists Ltd, we don't just replace pads and discs. We perform full brake system diagnostics, recalibrate electronic parking brakes (EPB), and reset ABS sensors-so your vehicle's safety systems function as designed.
All work uses OE-spec or premium alternative components (Textar, Brembo, Pagid) and includes full recalibration using dealer-level tools.
Why Brakes Fail Differently on JLR Vehicles
Unlike standard cars, JLR models integrate brakes with advanced driver systems:
Electronic Parking Brake (EPB)
Requires torque calibration after disc replacement
Adaptive Cruise Control
Radar alignment depends on wheel speed sensor accuracy
Terrain Response
Relies on ABS data for off-road modes (Discovery/Range Rover)
ABS/ESC Integration
Brake systems directly linked to electronic stability control
Common Issues We See:
Warped front discs from heavy use
Corrosion on cast iron discs
Worn brake pad wear sensors
Degraded brake fluid absorbing moisture
Critical Insight: Replacing discs without EPB recalibration can cause uneven pad wear, premature failure, or system errors.
Our Brake Repair Process
Step 1: Full Brake Inspection
Disc Measurement
Thickness checked with micrometer (min. 28mm front)
Pad Assessment
Visual & sensor resistance checks
Caliper Check
Slide pins inspected for binding
Fluid Test
Moisture content verified (<3% acceptable)
Step 2: Component Replacement
We use only OE-spec or premium alternatives:
Discs
Brembo, ATE, or genuine
Pads
Textar, Pagid, or Mintex
Sensors
New wear sensors all corners
Fluid
DOT 4+ fully synthetic
Step 3: Electronic System Recalibration
System Diagnostics:
- EPB reset and adaptation via Autologic/SDD
- ABS sensor validation with live data logging
Safety Systems:
- Adaptive cruise radar check (if equipped)
- All fault codes cleared and verified
Step 4: Road Test & Validation
- Braking performance tested at 30–60 mph
- EPB hold and release verified on incline
- No judder, noise, or warning lights confirmed
Step 5: Documentation
- Digital report with disc thickness measurements
- Fluid test results and component brands used
- Warranty certificate issued
What's Included
Not sure if your brakes are worn? See our Brake Problem Diagnosis guide.
Service Details
Workshop
A5 Windsor Road, Commercial Estate, Ramsden Heath, Billericay, CM11 1QE
Turnaround
Most brake jobs completed same-day
Warranty
12 months on parts and labour
Hours: Mon–Fri 9 AM–7 PM, Sat–Sun 9 AM–10 PM
Compliance: All work meets MOT and DVSA standards
We're VAT-registered (Company No: 16500838).
Frequently Asked Questions
Yes-and we always perform EPB recalibration to prevent errors or uneven wear.
If caused by worn pads or sensors, yes. We'll diagnose first to confirm.
Every 2 years-moisture reduces boiling point and corrodes ABS modules.
Only if OEM-fitted (e.g., SVR models). Aftermarket modifications can void warranties.
Ready for Safe, Reliable Brakes?
Don't compromise on safety. Get expert brake repair from JLR specialists.
Call Us
020 3576 6603
07975 827 396
contact@jlrengines.co.uk
JLR Engine Specialists Ltd
Company No: 16500838 | VAT Registered
A5 Windsor Road, Commercial Estate, Ramsden Heath, Billericay, Essex, CM11 1QE
Specialists in Jaguar, Land Rover & Range Rover Engines since 2009